Ford 6630 Tractor Specifications & Model Overview
The Ford 6630 is a utility tractor from the 30 Superforça Series, built in Curitiba, Brazil between 1992 and 1997.
With a 5.0L four-cylinder diesel engine rated at 90 hp, the 6630 offers strong performance for medium-size farms, handling tillage, transport, loader work, and PTO implements with ease.
It was sold with 2WD and 4WD options, using a simple 8-speed transmission and an open-center hydraulic system, making it robust and easy to maintain in markets across Latin America, Africa, and Asia.
1. Overview
| Item | Details |
|---|---|
| Model | Ford 6630 |
| Series | 30 Superforça Series |
| Type | Utility tractor |
| Production Years | 1992–1997 |
| Manufacturer | Ford (a part of New Holland) |
| Build Location | Curitiba, Brazil |
| Engine Power | 90 hp (67.1 kW) |
| Drive Options | 2WD (4×2) or 4WD (4×4) |
| Operator Station | Two-post ROPS (canopy commonly fitted) |
2. Engine
The Ford 6630 uses a Ford 5.0L four-cylinder diesel, shared with other 30 Series models. This engine is known for good torque at low rpm and straightforward mechanical design, which helps with servicing in rural areas.
| Specification | Details |
|---|---|
| Engine Model | Ford diesel |
| Displacement | 5.0 L, 4-cyl |
| Fuel Type | Diesel |
| Configuration | Liquid-cooled, inline 4 |
| Engine Power | 90 hp (67.1 kW) |
| Induction | Naturally aspirated (typical for 6630) |
| Design Notes | Simple mechanical fuel system, suited to varied fuel quality |
3. Transmission
The 6630 is equipped with a basic but durable 8-speed gear transmission, ideal for operators who prefer mechanical simplicity over electronics.
| Item | Details |
|---|---|
| Transmission Type | 8-speed geared transmission |
| Gears | 8 forward speeds (plus reverse) |
| Drive | 2WD or 4WD depending on version |
| Clutch | Dry single-plate (typical for this class) |
| Brakes | Wet disc brakes (via 30 Series family) |
| Steering | Power steering, 4×2 and 4×4 variants available |
4. Hydraulics & Hitch
The Ford 6630 uses an open-center hydraulic system, suitable for rear implements and basic loader work.
| Category | Details |
|---|---|
| Hydraulic Type | Open center |
| Pump Type | Gear-driven hydraulic pump (30 Series design) |
| Selective Valves | Typically 1–2 rear remotes (market-dependent) |
Rear Hitch
| Item | Details |
|---|---|
| Rear Hitch Type | Category II three-point hitch |
| Control | Position and draft control via top link sensing (typical 30 Series layout) |
5. PTO (Power Take-Off)
The PTO system on the 6630 is designed for a wide range of implements – mowers, sprayers, balers, and grain augers.
| Item | Details |
|---|---|
| Rear PTO | Independent |
| PTO Shaft | 540 rpm (1.375″ 6-spline) |
| Engagement | Independent control, convenient for frequent on/off PTO work |
6. Dimensions & Chassis (General)
The detailed factory dimensions for the Ford 6630 are not widely published, but it shares the mid-size utility chassis used across the 30 Superforça range.
| Category | Description |
|---|---|
| Chassis Class | Medium utility tractor (around 90 hp) |
| Axle Options | 2WD front axle or high-clearance 4WD MFWD front axle |
| Typical Use | Primary tillage, secondary tillage, transport, hay and livestock operations |
(For exact wheelbase, overall length, or shipping weight for a specific unit, checking the serial plate or original operator’s manual is recommended.)
7. Photos
Although early reference sites listed no images, many Ford/New Holland 6630 units are in active use today, especially in Brazil and Latin America. These tractors typically appear in blue Ford/New Holland livery, with:
-
Two-post ROPS and sun canopy
-
Large rear agricultural tires and narrower front tires
-
Front weight block on many 4WD units
Your website can display:
-
Side view in the field (plowing or discing)
-
Front-three-quarter view with ROPS and canopy
-
Rear view showing three-point hitch and PTO shaft
to help buyers visually confirm the model when they inquire.
If you are looking for FORD TRACTOR, please check our stock lists.
FORD TRACTOR for sale
Let’s work together !!
